
ProOperator®
All-day comfort for high-pressure cleaning: ventilation zips, pre-bent sleeves and knees. Also available in Hi-Vis (EN ISO 20471).
Jacket · trousers · overall · vest · apron · arm protections
Garments and kits →TST Sweden · Sweden · Official partner
Certified protective clothing and accessories for operating pressures from 200 to 3,000 bar, at four protection levels. We help you select the complete kit for your job.




Safety in high-pressure work
A water jet can cause serious injury even at low pressure, and above 2,000 bar it can cut through concrete. Ordinary workwear offers no protection against this: you need certified PPE that has been specifically tested against water jets.
Assess the jet force, equipment, environment and operator training, then define the risk zone and who may enter it.
Lower the pressure where the task allows, secure hoses and fittings, keep the area free of obstacles and slip hazards, and restrict access.
PPE is the last line of defence against the jet: it must be certified, cover every exposed part of the body and be inspected before use.
Body protection · 4 protection levels

All-day comfort for high-pressure cleaning: ventilation zips, pre-bent sleeves and knees. Also available in Hi-Vis (EN ISO 20471).
Jacket · trousers · overall · vest · apron · arm protections
Garments and kits →
Light, soft protection: a single layer of Dyneema® is enough in the protected areas. Waterproof outer fabric, 500,000 Martindale abrasion resistance.
Jacket · trousers · coat · overall · apron · hand protections
Garments and kits →
For heavy-duty water jetting, heat exchanger and tank cleaning. Five-layer construction, also with integrated ventilation.
Gamma Kit · jacket · trousers · apron · hand protections
Garments and kits →
Top protection for water jet cutting and hydrodemolition. Techsteel™ outer fabric, Dyneema® protective layer, maximum freedom of movement.
Gamma · Sigma · Delta · Alfa Kits · jacket · trousers · overall · vest · apron
Garments and kits →Dyneema® is the world's strongest fibre – 15 times stronger than steel, according to the manufacturer. The Techsteel™ outer fabric of EliteOperator® withstands more than 500,000 Martindale cycles.
Upper and lower body protection can be combined from separate garments. The right combination depends on the job: how much the operator moves, how warm it is and how many people share the same kit.
For jobs that require movement. Full front protection plus the neck, shoulders and forearms.
All four rangesWhen the operator climbs, crawls or kneels a lot. The overall protects the lower body, the vest the upper body.
EliteOperator® · overalls also in Ultra and ProFor warm environments: a vest and separate hand protection instead of a jacket – lighter and cooler.
EliteOperator®For stationary work in warm conditions. Quick to put on and take off, easy to share between operators.
Aprons in all four rangesEvery garment can also be ordered separately as a replacement or addition – select individual pieces in the selector below.
The complete protective kit
Full protection consists of four elements – body, head, foot and hose protection – and each must be rated for the operating pressure on its own. Set the pressure and nozzle type: every product shows whether it is suitable. You can also request single items as replacements.
The selector requires JavaScript. Request a quote for the products below and we will help you choose.




















































Catalogue · 116 pages · English
The complete product catalogue as a page-through viewer: product data, article numbers, test results, size charts and care instructions.
Applications
Wherever high-pressure water jets are used. Pick your job: we pre-set the kit builder as a starting point, then you can adjust the pressure to your own value.
Cleaning surfaces, machinery and vehicles – typically around 200 bar.
Recommended: ProOperator®Build a kit for this →High-pressure cleaning of municipal and industrial networks.
Recommended: ProOperator®Build a kit for this →Lance and rotary cleaning in confined and open spaces.
Recommended: 10/28Build a kit for this →Removal of rust, paint and coatings; water jetting typically runs above 1,200 bar.
Recommended: UltraOperator® – 10/28Build a kit for this →Controlled concrete removal and cutting at ultra-high pressure.
Recommended: EliteOperator®Build a kit for this →Hull and structure cleaning in dock and offshore.
Recommended: 10/28 – EliteOperator®Build a kit for this →Frequently asked questions
The EU defines water jets of 200 bar and above as high-pressure jets; PPE against this risk must be certified under Regulation (EU) 2016/425. Injuries can happen at far lower pressures too: skin penetration from 80 bar and eye injuries from as little as 7 bar.
A rotating nozzle's jet keeps moving, so it hits any one spot for a shorter time; a single-jet nozzle concentrates its energy on one point. That is why the same garment protects up to a higher pressure with a rotor nozzle – EliteOperator®, for example, up to 2,000 bar single and 3,000 bar rotor.
Only together with the test conditions, because there are no standardised protection classes for water jet PPE in the EU. Ask for the EU Declaration of Conformity and check the pressure, flow, nozzle, distance and sweep speed.
Every exposed part of the body must be protected: helmet with visor, neck protection, gloves or hand protections, boots or gaiters, and hose protection. Each element must be rated for the operating pressure on its own.
Yes. Jackets, trousers, overalls, vests and aprons can be ordered individually, and the EliteOperator® and 10/28 ranges also come as ready kits (for example the Gamma Kit: jacket + trousers). The right combination depends on the job.
With integrated ventilation (EliteOperator® and 10/28 trousers and overalls; 250–400 l/min of compressed air at 7 bar), a stand-alone ventilation vest or a phase-change cooling vest.
Humanex-Tech Kft. is a TST Sweden partner: we help you choose the right protection level and quote for the complete kit.
Tell us the pressure, nozzle type and team size – we will put the complete kit together.
Tell us what you're working with — our engineers will propose the right solution.